Description
|
Blacktip Jetsports Mat Kits are a great upgrade to factory traction mats. They provide not only a custom look but superior traction for safety in all types of riding situations from racing to cruising. All mat kits come standard with Blacktip's Jetsports |
installation guides & downloads
Shipping48 Hrs. |
CleaningUse only mild dishwashing soap to clean your mats, if you must clean grease from the mats we suggest using Simple Green brand cleaner only to do so. |
Product TypeBlackTip Jetsports |
Fits the items below
Click the + on each item to expand the model(s) for that brand / year.
2015 Yamaha
2015 Yamaha VX110 Cruiser 2015 Yamaha VX110 Deluxe 2015 Yamaha VXS 2015 Yamaha VXR2016 Yamaha
2016 Yamaha VX Cruiser HO 2016 Yamaha VX Cruiser 2016 Yamaha VX 2016 Yamaha VX Limited 2016 Yamaha VXR 2016 Yamaha VXS2017 Yamaha
2017 Yamaha VXR 2017 Yamaha VX Cruiser HO 2017 Yamaha VX Cruiser 2017 Yamaha VX Deluxe 2017 Yamaha GP1800S 2017 Yamaha VX2018 Yamaha
2018 Yamaha VX Cruiser HO 2018 Yamaha VXR 2018 Yamaha GP1800 2018 Yamaha VX 2018 Yamaha VX Deluxe2019 Yamaha
2019 Yamaha GP1800R 2019 Yamaha VX Limited 2019 Yamaha VX Cruiser 2019 Yamaha VX Deluxe 2019 Yamaha VX 2019 Yamaha VX-C 2019 Yamaha VXR 2019 Yamaha VX Cruiser HO2020 Yamaha
2020 Yamaha GP1800R HO 2020 Yamaha VX Cruiser HO 2020 Yamaha VX Cruiser 2020 Yamaha VX Deluxe 2020 Yamaha VX 2020 Yamaha VX Limited 2020 Yamaha VX-C 2020 Yamaha GP1800R HOInstallation Guides & Downloads
|
Removal of original riveted mats :Drill the heads off of the rivets holding down the original mats while pushing the remaining rivet into the hull. Fill the holes left by the rivet with 5min. epoxy, this can be purchased locally at any auto parts store. Make sure to scrape the epoxy flat in the foot wells so the new mats will lay flush. Clean the area that the new mats will be attached to with acetone solvent for proper adhesion. Removal of original glue down mats:By hand, peel off any old mat material that you are able to and then you use a putty knife to help remove all material from the difficult areas. Areas that are difficult may require spraying WD-40 brand lubricant in between the mat and hull to help loosen the old adhesive. Take your time on the prep work; this is important to achieve professional results. Now that your surface is clean and ready for the new mats it is time to lay out how your mats will look in the foot wells. This is the location the mats will be attached. Trace around the mats using a pencil. This is your reference area to place the mats after the paper is peeled off the back of the mat. Peel off the paper backing from the mat and line up one end of the mat to your traced out area. (Do Not Try to Install the complete mat in one shot) Slowly work the mat down into your outline. After the entire mat is installed you must apply even pressure down on top of the mat to insure complete contact to the hull. Let mats sit for 12 hrs after the install so the glue will fully cure. |
Warranty
|
Watercraft Superstore's BlackTip Jetsports traction mats have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains due to user negligence. We do our best to make sure every traction mat set is perfect, but sometimes things happen. If you should have a problem, please contact SBT @877.330.0231or sales@sbt.com to identify your issue. WHAT DOES THIS WARRANTY NOT COVER? This limited warranty does not cover any damage of the product due to: (a) installation of the product onto any surface; (b) adhesion of the product to a boat deck or to any other surface to which the product is applied; (c) deformation, fading, discoloration or polymer degradation of the product resulting from non-defective materials; (d) exposure of the product to temperatures in excess of 165F which may occur as a result of the amplification of sunlight from reflective surfaces or the passing of sunlight through a refractive medium such as windshields or other structures which shall operate to void this limited warranty; (e) failure to follow the product instructions or to perform preventive maintenance; (f) modifications to the product; (g) unauthorized repair; (h) normal wear and tear; or (i) external causes such as accidents, abuse, or other actions or events beyond our reasonable control. |