Glossary

Engines, 2-stroke crankshafts, 4-stroke cylinder heads, cylinder kits, rotary valve covers, counterbalance shafts are only sold on exchange.

Engine includes cases, crank, cylinders, head assemblies, power valves and all new pistons, rings, rods, bearings, seals and gaskets.

Crankshafts are trued and welded, and include new rods, bearings, wrist pin bearings and inner seals.

4-stroke crankshafts and camshafts are sold new

Cylinder exchange kits include painted cylinders, pistons, gapped rings, wrist pins, c-clips, head gaskets, base gaskets, exhaust gaskets and intake gaskets. Wrist pin bearings are included upon request.

Top-end kits include pistons, rings base gaskets, head gaskets, wrist pins and c-clips. Wrist pin bearings are included upon request.

Piston and ring sets include pistons, rings, wrist pins and c-clips.

Installation kits include all the gaskets required to swap an engine according to our guidelines.

Complete gasket kits include all head gaskets, base gaskets, crank seals, exhaust and intake gaskets.

R.A.V.E. and power valves are sold in the stock size only and may need to be recut to application.

R.A.V.E. and power valve kits include the housing gasket/o-ring/seals, shaft o-rings and bellows.

Carburetor rebuild kits include replacement diaphragms, check valves springs, o-rings, fuel filters and gaskets.

Jet Pump rebuild kits include the jet pump bearings, oil seals, o-rings and thrust bearing and washer where applicable.